|
||||||||||||||||||||||
| Aluma Burrs Coarse Cut Carbide
Aluma cut for use on: |
These carbide burrs are specially designed for fast stock removal of soft material without loading. Design allows chips to flow out of the flutes.
For best results use with OptiCut-NF Lubricant or Wax Stick. |
Oval
Shape E
| Part # | Burr | Length |
| Dia | of Cut | |
| SE103 | 3/8" | 5/8" |
| SE105 | 1/2" | 7/8" |
| SE106 | 5/8" | 1” |
| SE107 | 3/4" | 1" |
Cylinder Radius End
Shape C
| Part # | Burr | Length |
| Dia | of Cut | |
| SC103 | 3/8" | 3/4" |
| SC105 | 1/2" | 1" |
Radius Tree
Shape F
| Part # | Burr | Length |
| Dia | of Cut | |
| SF103 | 3/8" | 3/4" |
| SF105 | 1/2" | 1" |
| SF106 | 5/8" | 1" |
Flame
Shape H
| Part # | Burr | Length |
| Dia | of Cut | |
| SH102 | 5/16" | 3/4" |
| SH105 | 1/2" | 1-1/4" |
| SH106 | 5/8" | 1-7/16" |
| SH107 | 3/4" | 1-1/2" |
Shank diameter: 1/4".
Length of shank: 2-1/4", 4" or 6".
See Quantity Discounts
Recommend RPM 7500.
DO NOT FREE SPIN
FOR HAND GRINDING ONLY!
